FS201-S ログファイルの '<ファイル名>' へのバックアップに失敗しました The Fileshare Server failed to copy the recovery log file to the directory and name specified. Possible causes are that the
directory is full or that a disk I/O error occurred during the copying process.
FS202-I Fileshare サーバーは、ログ ファイル '<ファイル名>' へのログ処理を続けます The Fileshare Server failed to backup the recovery log file as part of an FSView or FSMgr operation and is trying to continue
logging to the old recovery log file specified.
FS205-W 古いリカバリ ログ ファイル '<ファイル名>' を消去できません The Fileshare Server has successfully backed-up the recovery log file as part of an FSView or FSMgr operation. However, deleting
the old recovery log file returned an unexpected error. The Fileshare Server tries to create the new recovery log file.
FS206-W 2 つ以上の開始ログ ファイルがあります。リカバリ ユーティリティは、どれを使用するか決められません You see this message when the Rollforward Recovery Utility has determined that there is more than one starter recovery log
file. When the Fileshare Server starts, it creates a starter recovery log file and a new log file.
FS207-I ログ ファイル ディレクトリ中に、開始ログ ファイルがありません The Rollforward Recovery Utility has been invoked and has scanned all of the recovery log files in the current directory.
It has not found a starter log file, so the recovery cannot start using a log file in the recovery log file directory.
FS208-S ログ ファイル バックアップ ディレクトリ中に、開始ログ ファイルがありません The Rollforward Recovery Utility has been invoked and has scanned all of the recovery log files in the backup directory. No
starter log file was found and so the recovery cannot commence.
FS209-I 開始ログ ファイルが、ログ ファイル バックアップ ディレクトリ中に位置付けられました The Rollforward Recovery Utility has not found a starter log file in the recovery log file folder, but one was located in
the backup folder. The Rollforward Recovery Utility can start the rollforward recovery.
FS210-S バックアップ ディレクトリ中に、2 つ以上の開始ログ ファイルがあります The Rollforward Recovery Utility has scanned through all of the recovery log files that are in the backup directory and has
determined that there is more than one starter recovery log file.
FS211-S ログ ファイル '<ファイル名>' の見出しの確認中に、エラーが発生しました The Rollforward Recovery Utility found the log file indicated but was unable to open it. This message can also indicate that
the file was opened successfully but the Rollforward Recovery Utility could not read the first record in the file.
FS212-I ロールフォワード リカバリ ユーティリティがログ ファイル '<ファイル名>' を処理しています The Rollforward Recovery Utility has successfully opened the starter or continuation recovery log file indicated and is processing
the update information contained in it
FS214-I ログ ファイル ディレクトリ中にバックアップされたログ ファイルを検索しています The Rollforward Recovery Utility cannot find the required recovery log file in the current log file directory. It is now searching
for a backed-up copy of the required recovery log file in the log file directory.
FS215-I ログ ファイル バックアップ ディレクトリ中にバックアップされたログ ファイルを検索しています The Rollforward Recovery Utility cannot find the required recovery log file in the current log file directory. It is now searching
for a backed-up copy of the required recovery log file in the backup directory
FS224-S ログ ファイル ディレクトリに、バックアップされた開始ログ ファイルが 2 つ以上あります The current log file directory contains more than one backed-up starter log file and so the Rollforward Recovery Utility is
unable to determine which one is the correct one to use.
FS225-S ログ ファイル バックアップ ディレクトリに、バックアップされた開始ログ ファイルが 2 つ以上あります The Rollforward Recovery Utility has searched the backup directory for a backed-up starter log file. The backup directory
contains more than one backed-up starter log file and so cannot determine which one is the correct one to use.
FS228-I CCI SEND 状態が確認されました A request sent back from the Fileshare Server to a client application, which previously had not completed within the expected
time period, has now either failed or completed successfully.
FS229-I 認識できない CCI セッション ID - ユーザーを切断できません The Fileshare Server tried to disconnect a Fileshare Client. However, the CCI session ID is invalid which means that the Fileshare
Server cannot find details of this Fileshare Client.
FS230-I ユーザー : <ユーザー ID><ユーザー名> You see this message when the Fileshare Server has received an error from a CCI module following a communications request.
The error message indicates a problem has occurred in contacting a specific Fileshare Client.
FS231-S パラメーター 'nnn' が数字ではありません You see this message when the Fileshare Server is parsing the information supplied on the command line or in the Fileshare
Server configuration file. The option specified requires a value which is numeric, however the value specified is not numeric
and so that parameter cannot be processed.
FS232-I 日付:<日付> This information is written to a Fileshare Server trace file (if one is in use) when the Fileshare Server starts up. It is
also written to the Fileshare Server trace file when the date of the previous message written to the trace file is different
to the current date and a new message is being written to the trace file.
FS235-W 不完全な CCI SEND 処理用メモリの割り当てエラーです The Fileshare Server has tried to allocate some memory in order to process CCI requests to multiple Fileshare Client sessions
simultaneously, but there is insufficient free memory available. Consequently, the Fileshare Server may not be able to process
communications requests correctly.
FS236-I ログ ファイル名は、データベース参照ファイルから削除されました This message indicates that the Database Reference File Maintenance Utility has successfully removed the log file name from
the database reference file
FS237-W 次に使用するログ ファイル ('<ファイル名>') がすでに存在します。現在のログ ファイルはバックアップできません The Fileshare Server has tried to back up the current log file but was unable to create a new recovery log file because a
file of that name already exists. The Fileshare Server will try to re-open the old log file and continue to write records
to it.
FS238-I このユーザーによって通信を終了します。 You see this message, together with FS015-W, when the network connection with an unknown Fileshare Client terminates
FS239-I 出力 - <ユーザー> レコードがロックされました。再度行ってください。 You see this message when tracing is enabled and an I/O operation returns a status of record locked. The user application
making the request is compiled with the RETRYLOCK directive which specifies that the request is automatically retried when
a status of record locked is returned. The Fileshare Server sends this message to the Fileshare Client requesting that it
retries the operation.
FS240-I 出力 - <ユーザー> ファイルがロックされました。再度行ってください。 You see this message when tracing is enabled and an I/O operation returns a status of file locked. The user application making
the request has the Callable File Handler RETRYOPEN option set which specifies that the open request is automatically retried
when a status of file locked is returned. The Fileshare Server sends this message to the Fileshare Client requesting that
it retries the operation.
FS241-I 出力 - user ログ ファイルのディスク容量が足りません。再度行ってください。 You see this message when tracing is enabled and the amount of free disk space available to the Fileshare Server to log updates
in the log file is below 200 Kbytes. See the messages FS030-S and FS114-W for further information.
FS244-S バックアップされたファイル '<ファイル名 1>' を '<ファイル名 2>' に復元するのに失敗しました An error has occurred while copying the file specified by filename1 to the destination specified by filename2 during an automatic restoration of the data files before running the Recovery Utility
FS247-I ディレクトリ <バックアップ ディレクトリ> からデータベース ファイルを復元しています。お待ちください The data files listed in the database reference file are being copied from the directory specified by the /backup option to their correct locations in preparation for a Fileshare Recovery
FS248-I 自動的に Fileshare リカバリを開始しています This message indicates that the Fileshare Recovery Utility has been automatically invoked because the Fileshare Server has
detected that the previous server session did not close down successfully
FS249-I Fileshare サーバーを再開しています This message indicates that the automatic Fileshare Recovery has completed successfully and that the Fileshare Server is restarting
FS250-I 不要なログ ファイルをすべて削除しています This message indicates that Fileshare is deleting redundant log files before re-starting the Fileshare Server when a new log
file is created
FS251-S バックアップ ディレクトリを指定するときはログ処理をすべてのファイルに対して有効にする必要があります You have specified that update logging is to be switched off for one of the files named in the database reference file but
have also specified a backup directory-name. You cannot do this because Fileshare automatically backs up (and restores where
necessary) all the files listed in the database reference file, in order to keep them synchronized with the log file, when
a backup directory is specified. If logging is not active for all files, Fileshare cannot guarantee that it can restore and
recover the correct versions of these files.
FS252-S ファイル '<ファイル名>' の削除に失敗しました An error occurred while deleting the file filename during an automatic backup or restoration of the data files