FS103-I ログ ファイル名を、データベース参照ファイルに追加しました The Database Reference File Maintenance Utility has been invoked to add a recovery log filename to the database reference
file and the operation has completed successfully. The database reference file now contains the name of the recovery log file
specified.
FS104-I ログ ファイルが見つかりません。新しいリカバリ ログ ファイルを作成します The Fileshare Server on starting up has processed the database reference file and determined the name of the rollforward recovery
log file to use. The recovery log file does not exist and so the Fileshare Server has created a new one.
FS105-W ログ ファイル用のディスク空き領域が、許容限度を下回っています The Fileshare Server has detected that the amount of disk space remaining on the drive where the recovery log file is being
written is below a certain level.
FS106-I <ファイル名> - データベース参照ファイルへの追加 This message indicates that the Database Reference File Maintenance Utility has successfully added the filename indicated
to the database reference file.
FS107-I <ファイル名> - データベース参照ファイルからの削除 This message indicates that the Database Reference File Maintenance Utility has successfully removed the filename indicated
from the database reference file.
FS108-I データベース参照ファイルに指定されたファイルを処理しています This message indicates that the Fileshare Server has opened the database reference file and is now scanning through it, processing
each filename listed. The type of processing that it performs depends on the utility being used:
FS109-W ファイル <ファイル名> がありません。 You see this message when the filenames listed in the database reference file are being processed and indicates that the file
indicated cannot be located physically on disk.
FS110-I <ファイル名> - OK The Fileshare system has successfully processed the entry indicated in the database reference file and the file has been physically
located on disk.
FS111-W ファイルがまだ開いています。Fileshare サーバーの終了処理を続けますか (Y/N) ? You have selected to close down the Fileshare Server using the Esc key sequence. This message indicates that Fileshare Clients are still connected to this Fileshare Server with files open,
or at least one Fileshare Client application program has terminated abnormally leaving one or more files open. You are asked
to confirm that you do want to shut down the Fileshare Server even though there are files open.
FS114-W 削除する古いログ ファイルを待っています The drive where the rollforward recovery log file is being written has become full and the Fileshare Server is no longer able
to continue writing to the rollforward recovery log file. The Fileshare Server is waiting for the old log file to be backed
up and then deleted so that it can continue writing to the directory where the log file resides.
FS118-I データベース シーケンス番号は、ログ ファイルのシーケンス番号と一致しています。リカバリ作業は必要ありません For files formats with file headers (all index files and variable length record relative and sequential files), the Fileshare
Server stores a sequence number in the header. This sequence number is also placed in the recovery log file. The sequence
numbers can be checked by the Fileshare Server in certain situations to ensure that the correct files are in use.
FS122-I CCI SEND で通信が混雑しています - 再試行中 The Fileshare Server tried to send a reply back to the Fileshare Client performing an I/O request. CCI returned a Too Busy error (error 10) to the Fileshare Server.
FS123-I CCI RECEIVE で通信が混雑しています - 再試行中 The Fileshare Server tried to receive information from the network but CCI returned a Too Busy error (error 10) to the Fileshare
Server
FS124-I ログ ファイルの妥当性を確認中です。お待ちください You see this message when the Rollforward Recovery Utility has been invoked and it has not found a valid record as the last
record in the recovery log file. The Rollforward Recovery Utility scans through the log file to find the last sequence number
that was in use to validate the integrity of the recovery log file.
FS125-I 最終の有効リカバリ ログ ファイル レコード You see this message when the Rollforward Recovery Utility has been invoked. This message indicates that the recovery log
file has been validated up to the point of the last complete record in the recovery log file. It is therefore possible to
apply the updates stored in the recovery log file up to this point.
FS126-I リカバリを行っています。お待ちください The Rollforward Recovery Utility has been invoked and has initialized successfully, processed the database reference file,
checked the sequence numbers in the file listed in the database reference file and validated the recovery log file.
FS127-S 不正な名前のマッピング用コマンドです You see this message when the Fileshare Server or Rollforward Recovery Utility is processing the command line or entries in
the database reference file. An /fs (file string replacement) option has been specified without a corresponding /af option specifying the new string value. The /fs option must be used in conjunction with the /af option.
FS128-W Fileshare サーバーは Stop Run 操作によって終了します This message indicates that the Fileshare Server has entered its termination routine not under the control of an administrator
(that is, the Esc key sequence or FSView or FSMgr are not being used to shut down the Fileshare Server).
FS129-I Fileshare サーバーはまだ動作しています The response to the prompt as to whether the Fileshare Server should be closed down (see messages FS097 and FS111) indicated
that the Fileshare Server should not be shut down.
FS130-I データベース参照ファイルを読み取っています。お待ちください The Fileshare Server, Database File Maintenance Utility or the Rollforward Recovery Utility is reading the information stored
in the database reference file. The utility will try to open the database reference file and process the information held
in it.
FS131-W 不正な通信モードです - パラメーターは無視されました You see this message when the Fileshare Server is processing a /cm (communications) option. The value specified for this parameter is not valid and the parameter has been ignored. See the
chapters Communications and Configuration for details of valid communications modes.
FS132-I Fileshare サーバーは、以下の通信プロトコルで実行されています: This message gives a list of the communication protocols that the Fileshare Server is using, after it has performed all of
its initialization processing.
FS133-I パスワード ファイルを処理しています。お待ちください You see this message displayed by the Fileshare Server when it is starting or by the Password File Maintenance Utility when
the password file is being updated.
FS135-I Fileshare サーバー セキュリティはアクティブです Fileshare Server security is active and all Fileshare Client applications that try to access this Fileshare Server should
supply a valid user-ID and password that are in the password file. If you do not provide a valid user-ID or password, access
will be denied and a 9/037 error returned to the application.
FS136-I Fileshare サーバー セキュリティがアクティブではありません A password file has been specified, however the only user-ID specified in the file is the FSVIEW (supervisor) id. Because
this is the only ID, Fileshare Server security is not active and Fileshare Client applications that try to access the Fileshare
Server do not have to supply a valid user-ID or password.
FS138-W ログ ファイルがバックアップされ、新しいものが作成されました You see this message when the Fileshare Server is starting up and a recovery log file already exists. The Fileshare Server
has determined that it is unable to append to the recovery log file because the last record in the log file indicates that
it was not shut in a controlled manner.
FS139-I ログ ファイル中に、日付と時間の一致する項目が見つかりました The Rollforward Recovery Utility displays this message when the /dt option has been used to recover updates to a certain point in time. The Rollforward Recovery Utility has performed the recovery
using the recovery log file and has applied the updates up to the date and time specified. This message implies that there
were additional records stored in the recovery log file which were not processed as they were written after the time specified.
FS140-I ログ ファイル中に、日付と時間の一致する項目が見つかりません You see this message displayed by the Rollforward Recovery Utility when the /dt option has been used to recover updates to
a certain point in time. The Rollforward Recovery Utility has performed the recovery using the recovery log file and reached
the end of the log file before a record could be found that was written at the date and time specified. This implies that
the date and time specified when performing the recovery is later than the date and time that the last record was written
to the recovery log file. All the updates stored in the recovery log file have been applied to the data files.
FS142-W オペレーティング システムは、ログ ファイルをディスクに書き出すことを禁じています You see this message when the Fileshare Server is using a recovery log file to store updates made to files. At certain points
during its operation the Fileshare Server makes a call to the operating system to force it to flush the contents of the recovery
log file to disk. This ensures that any data that has been written to the recovery log file is physically stored on disk and
can be read in again after a system failure. The Fileshare Server performs this flush operation after every COMMIT operation
is performed and at regular intervals (the default being after every 100 records have been written to the recovery log file,
which can be changed using a /lc entry in the database reference file).
FS143-W オペレーティング システムは、空きディスク情報の取得を認めていません When writing a recovery log file, it is important that there is enough disk space available. Consequently, the Fileshare Server
makes periodic checks to see whether sufficient disk space remains.
FS144-W 二つ以上の通信プロトコルが指定されました - 同期通信モードはアクティブではありません You have tried to start the Fileshare Server using the synchronous communications mode (as opposed to the asynchronous communications
mode which is the default) using the /sc option.
FS145-W Fileshare クライアントが切断されました。ユーザーに連絡できません:<テキスト> The CCI has returned an error to the Fileshare Server indicating that a Fileshare Client has been disconnected. This message
indicates that there may be a problem with the network or that the Fileshare Client application program is no longer functioning.
FS146-W 予期しない動作コード <動作コード> - 廃棄しました You see this message when performing a rollforward recovery. The Rollforward Recovery Utility has read a record from the recovery
log file which contains information not relating to any file currently being recovered. The information in the record cannot
be processed and the Rollforward Recovery Utility has moved onto the next record in the recovery log file.
FS147-I 重複するネットワークメッセージを受け取り、廃棄しました This message only occurs when you are using the CCIIPX protocol and indicates that you are using an old version of the CCIIPX
modules. The buffer sent between the Fileshare Client and Fileshare Server for each I/O request contains additional information
which enables the Fileshare Server to check on the validity of the request. This message indicates that the Fileshare Server
has received (in error) a duplicate of the previous buffer received from the communications system. This duplicate buffer
has been discarded as it is not a valid I/O request.
FS148-I CCI 戻りコード (ファンクション <ファンクション>) You see this message when the Fileshare Server receives an unexpected error status from a CCI module. It is normally displayed
in conjunction with a Fileshare Server message indicating the circumstances in which the error occurred.
FS149-I CCI SEND が完了していません。後で状態を確認します A request sent back to a client application from the Fileshare Server has not completed within the expected time period. This
message indicates that the Fileshare Server will continue processing requests from other client applications normally and
will check the status of this request at a later time.