FS051-W より大きなバッファーの割り当てエラー。入出力要求は失敗しました When using compression on the communication buffers, this message indicates that there was not enough memory available to
the Fileshare Server to enable it to decompress the buffer. The I/O request has failed and the Fileshare Client was returned
a 9/105 (out of memory) error.
FS056-S パラメーター '<テキスト>' が、範囲 0-255 にないデータ圧縮値を指定しています You have tried to add an entry to the database reference file. This entry specifies a value for the data compression outside
of the permitted limits. The data compression option must specify a value within the range 0 through 255. To use the routine
CBLDC001 as the compression method on records in the file, specify a compression value of 1.
FS057-S パラメーター「text」で指定するキー圧縮値が 0~7 の範囲内にありません。 You have tried to add an entry to the database reference file which specifies a value for the key compression outside of the
permitted limits.
FS058-S ログ ファイルの圧縮解除用メモリの割り当てエラーです The Rollforward Recovery Utility has been invoked but is unable to allocate the required memory so that it can process the
recovery log file. This error is displayed during the initialization of the recovery process and indicates a shortage of available
memory.
FS059-S データベース参照ファイル用のメモリの割り当てエラーです When reading in a database reference file (either when the Fileshare Server or the Rollforward Recovery Utility is starting)
this message indicates that the Fileshare Server was not able to allocate the required memory to be able to process all of
the information in the database reference file
FS064-S パスワード ファイル <ファイル名> の読み取りエラーです The Fileshare Server encountered an error reading the information from the password file. This implies that an I/O error occurred,
the password file has become corrupted in some way or that a network error occurred if the password file is located on a remote
machine.
FS065-S パスワード ファイルが認識できる形式ではありません The first record in the password file is a special record which indicates to the Fileshare Server that the file is a password
file. This record also contains information regarding the version of the password file being used.
FS066-W 指定されたユーザー名は、すでにパスワード ファイルに存在します You see this message when using the Password File Maintenance Utility and you have tried to add a user name to the password
file when the user name already exists in the password file
FS068-I パスワード ファイルが空になり、削除されました You see this message when you have used /e (erase) option with the Password File Maintenance Utility to remove the last entry from the password file. As the password
file is now empty, it has been deleted. If a new password file is required it is created automatically when you add an entry
using the Password File Maintenance Utility.
FS069-W 指定された項目が、パスワード ファイル中に見つかりません This message indicates that you have used /e (erase) option with the Password File Maintenance Utility to remove an entry, but the entry specified does not exist in the
password file.
FS070-S パスワード ファイルへの書き込みエラーです The Password Maintenance Utility encountered an error when it tried to write information to the password file. This implies
that an I/O error occurred (possibly a full disk) or a network error was encountered (if the password file is on a remote
machine). The integrity of the password file cannot be guaranteed.
FS071-W データ領域を圧縮解除するために、モジュール FHXSCOMP をロードすることはできません This message indicates that the Fileshare Server has received a compressed communications buffer. However, it is unable to
load the decompression module FHXSCOMP in order to perform the necessary decompression. There may not be enough memory to
load the module or the module may not be found.
FS072-S パラメータ '<テキスト>' が、このパラメータでは使えないワイルドカードを持っています A parameter containing a wild card symbol was specified when invoking the Database Reference File Maintenance Utility but
the parameter does not support wild cards.
FS073-S パスワード ファイル処理用のメモリの割り当てエラーです When reading in a password file (when either the Fileshare Server or the Password File Maintenance Utility is starting), this
message indicates that the Fileshare Server was not able to allocate the required memory to be able to process all of the
information in the password file.
FS077-S 同じ名前の Fileshare サーバーがすでに定義されています - Fileshare サーバーは終了します When the Fileshare Server starts up, it registers its name on the network so that Fileshare Clients can connect to it. This
message indicates that the Fileshare Server is trying to register with a name that is already in use by another Fileshare
Server on the network.
FS080-S 同期通信モード使用のためのパスワード ファイルが指定されていません You have tried to start the Fileshare Server using synchronous communications (as opposed to asynchronous communications which
is the default). To enable the use of synchronous communications, you must specify a password file which contains a supervisor-ID
of FSVIEW. This enables the Fileshare Server to be closed down remotely using FSVIEW or FSMgr. This is necessary because in
this communications mode, the Fileshare Server only checks for keyboard input very occasionally.
FS081-S 同期通信モード用にスーパーバイザー パスワードをパスワード ファイルに指定しなければなりません You have tried to start the Fileshare Server using synchronous communications (as opposed to asynchronous communications which
is the default). To enable the use of synchronous communications, you must specify a password file which contains a user-ID
of FSVIEW. This enables the Fileshare Server to be closed down remotely using FSVIEW or FSMGR. This is necessary because in
this communications mode, the Fileshare Server only checks for keyboard input very occasionally.
FS082-S Netbios 通信プロトコルが応答しません。リクエスター ソフトウェアがロードされ機能しているか確認してください You have tried to start the Fileshare Server using the Netbios protocol (CCINETB) but the required network software is not
loaded or is not operational. The Fileshare Server is trying to use the NETBIOS software but is receiving invalid data.
FS083-S 互換性のない CCIIPX.NLM バージョンです The Fileshare NLM Server has detected that the version of cciipx.nlm being used is not a compatible version. You are probably trying to use an old version of the CCIIPX NLM with this version
of the Fileshare NLM.
FS084-I Fileshare サーバーを開始します (改訂 <番号>) This message indicates that the Fileshare Server is in the process of initializing. The configuration, database reference
and password files (if specified) are being processed and the communications software is being loaded and initialized.
FS085-I Fileshare サーバーは動作します This message indicates that the Fileshare Server has completed its initialization processing and is now ready to accept incoming
requests from Fileshare Clients. At this stage all of the configuration, database reference and password files have been processed
and the communications software has been successfully initialized and is operational.
FS086-I Fileshare サーバーを終了します This message indicates that the Fileshare Server has started the process of closing down and will shortly terminate. This
can be invoked by the following:
FS087-I Fileshare サーバーは終了しました This message indicates that the Fileshare Server has completed all of its termination processing. All communications have
stopped, all files closed, all transactions rolled back and any rollforward recovery log file shut. The Fileshare Server can
now be restarted when necessary.
FS089-I データベース参照ファイル メンテナンス ユーティリティ The Database Reference File Maintenance Utility has been invoked using the parameters specified on the command line or in
the Fileshare Server configuration file. The Database Reference File Maintenance Utility will try to process the remaining
parameters specified as options to this utility.
FS090-I データベース参照ファイルのインストールが問題なく完了しました The Database Reference File Maintenance Utility has been invoked successfully and the required change made to the database
reference file has been made.
FS091-I ロールフォワード リカバリ ユーティリティ The Rollforward Recovery Utility has been invoked using the parameters specified on the command line or in the Fileshare Server
configuration file.
FS092-I ロールフォワード リカバリが完了しました The recovery process is now complete: the files contain the updates recorded in the log file when the Fileshare Server was
in use.
FS094-I パスワード ファイル メンテナンス ユーティリティ The Password File Maintenance Utility has been invoked using the parameters specified on the command line or in the Fileshare
Server configuration file.
FS096-I パスワード ファイルのインストールが完了しました The Password File Maintenance Utility has successfully updated the password file using the options specified when the Password
File Maintenance Utility was invoked.
FS097-I Fileshare サーバーを終了しますか? (Y/N) You have used the Esc key sequence to close down the Fileshare Server. This message is an additional prompt to avoid closing down the Fileshare
Server in error.
FS099-W ファイル入出力状態が、期待されるものではありません状態の戻り値はstatus、予期される状態は status、アクション コードは text、ファイルは filename です。 This error occurs when a file is being recovered using the Rollforward Recovery Utility. When the log file is written during
the normal operation of the Fileshare Server, a record is made in the log file of the status of each I/O operation performed.
At the time of recovery, the status returned during the recovery process is compared with that stored in the recovery log
file.